Peak Flow Meter
What is a peak flow meter?
A peak flow meter is a device used to measure how well a person's asthma is under control. The device measures air flowing out of the lungs, called peak expiratory flow rate (PEFR), as a person with asthma forcefully blows into the device. A peak flow meter, when used properly, can reveal narrowing of the airways well in advance of an asthma attack. Used mainly by persons with moderate to severe and persistent asthma, peak flow meters can help determine:
when to seek emergency medical care.
the effectiveness of a person's asthma management and treatment plan.
when to stop or add medication, as directed by your physician.
what triggers the asthma attack (such as exercise-induced asthma).
What are peak flow zones?
Peak flow zones are based on the traffic light concept: red means danger, yellow means caution, and green means safe. Based on your personal best peak flow measurement (the optimal level of your lung function), your three peak flow zones include:
Green: 80 to 100 percent of your personal best peak flow measurement; asthma is under control.
Yellow: 50 to 79 percent of your personal best peak flow measurement; asthma is getting worse; you may need to use quick-relief medications or other medication, as directed by your physician.
Red: below 50 percent of your personal best peak flow measurement; medical alert, take quick-relief medication and seek medical help immediately.
The goal of the peak flow zones is to help you recognize when the asthma may start to become uncontrolled. The goal is to stay within the 80 percent value of your personal best peak flow measurement. Zones with a smaller range, such as 90 to 100 percent, may be recommended by some health care providers. Always follow the advice of your doctor regarding the peak flow rate.
How is a personal best peak flow measured?
Each person's peak flow zones are based on his/her personal best peak flow number. To establish your personal best peak flow meter, take your peak flow measurement each day at the same time (middle of the day) for two to three weeks, when your asthma is under control.
After recording your peak flow measurements for two to three weeks consistently, your physician may also measure your optimum lung function with a spirometer (a device that can check lung function by measuring both the amount of air expelled and how quickly the air was expelled). The spirometer measurement may then be compared with the peak flow meter record to help set up an asthma management and treatment plan.
Your personal best peak flow measurement may change over time. Consult your physician as to when to check for a new personal best peak flow measurement.
When should a peak flow meter be used?
Peak flow meters should be used regularly to check how well the asthma is being controlled. In addition, the peak flow meter may be a valuable tool during an asthma attack, because it can help determine how well the short-term, quick-relief asthma medication is working. The National Heart, Lung, and Blood Institute (NHLBI) recommends measuring lung function during the following times:
every morning, before taking asthma medications
during asthma symptoms or an asthma attack
after taking medication for an asthma attack
other times recommended by your physician
However, the peak flow meter is a tool to help collect information. The key to successful asthma management is communicating this information (the peak flow meter recordings, the severity of your symptoms, and the effectiveness of your medications) to your physician.
How can I obtain a peak flow meter?
Peak flow meters are available over-the-counter and without a prescription. However, always consult your physician about obtaining a peak flow meter and for step-by-step instructions on how to use the device.
If you are using more than one peak flow meter, be sure they are the same brand.